Audio & TechnicalUtility
Runs in your browser

Mic Test: Check Your Microphone Online

Find out if your mic works and how it sounds before you record. Watch the live level, spot clipping, measure your room's background noise and play back a short test clip. Everything runs on your device and nothing is recorded or uploaded.

100% Client-Side Memory
2026 Industry Spec Verified
Input level−∞ dB, peak −∞ dB

Press Start and say a few words.

Processing

Turn all three off to hear your mic as it really is. Changing one restarts the test.

Your recording

Room noise

Stay silent for 3 seconds.

What the Mic Test does

The Mic Test shows whether your microphone works and how it sounds before you hit record. Press Start, say a few words, and watch the level meter and waveform react in real time. A plain-language verdict tells you if the signal is too quiet, in a good range or clipping.

You can switch between microphones, measure your room's background noise and record five seconds to play back. The test runs entirely in your browser, so no audio is saved or sent anywhere.

How to use it

  1. Allow the microphone

    Press Start mic test and choose Allow when your browser asks. If you blocked it before, click the lock icon in the address bar to turn it back on.

  2. Pick your microphone

    Choose the right device from the list. A USB mic, a headset and your laptop's built-in mic show up as separate inputs.

  3. Speak at your normal volume

    The level bar should sit in the orange middle range while you talk. If it turns red, you're clipping, so lower the input gain or move back.

  4. Record and play back

    Record 5 seconds and play it back. Then measure room noise while you stay silent to see how much hiss or hum your space adds.

Tips for better results

  • Aim for peaks between about −12 and −6 dB when you speak. That leaves headroom and stays well above the noise.
  • Echo cancellation, noise suppression and auto gain are built for calls. Turn them off to hear your real mic, then decide what you want for recording.
  • If the meter doesn't move, check the physical mute switch, your system's input device and whether another app has taken over the microphone.

How do I know if my mic is good enough for a podcast?

Speak normally and check three things. The level should reach roughly −18 to −6 dB without turning red, the room noise should read below about −48 dB, and the playback should sound clear without hiss, hum or distortion.

If the noise reading is high, move away from fans and computers, close the door, or try a dynamic microphone, which picks up less of the room than a condenser.

Check a finished episode with the LUFS Meter

Related Production Tools

Frequently Asked Questions

Answers to common questions about privacy, pricing, and how the tools work.

How do I test my microphone online?
Press Start mic test and allow microphone access when your browser asks. Speak and watch the level bar and waveform move. If they react to your voice, the mic works. Record 5 seconds to hear exactly how it sounds.
Why is my mic not working or not showing any level?
Check that the mic isn't muted by a switch or in your system settings, that the right device is selected in the list, and that your browser has permission to use it. Another app such as a call or recording program can also take exclusive control of the microphone, so close it and try again.
Is my voice recorded or uploaded during the test?
No. The audio is analyzed inside your browser tab and never sent to a server. The 5-second playback clip is kept only in memory on your device and disappears when you close or reload the page.
What is a good microphone level for recording?
Aim for speech peaks around −12 to −6 dB. Much lower and your recording will be noisy once you raise it. At 0 dB the signal clips and distorts, and that can't be repaired afterwards.
Should I turn off noise suppression and echo cancellation?
For recording, usually yes. These filters are designed for video calls and can make a voice sound thin or watery. Turn them off here to hear your mic as it really is, and use a quiet room or editing software for cleanup instead.